In process technology and plant engineering, the definition of „hygienic design“ refers to the design of machines and plants with consideration of the cleanability of the system. This is always relevant where products are manufactured that can be dangerous for the consumer due to germs or contamination and also where
Read More

National and International guidelines for the food, pharmaceutical and biochemical industries place very high hygiene demands on manufacturers supplying equipment into these industries. Plant and machinery must be manufactured with the understanding that all parts, which could come into contact with food or pharmaceutical products, must be easy as well
Read More

Another state-of-the-art sensor format has been designed and developed by Rechner, through customer partnerships, providing unique new optimum process control solutions! Often, in production processes, and especially in Food + Pharmaceutical set-ups, the addition of one ingredient to another can develop into a significant change in the resultant detected dielectric
Read More

RECHNER Sensors has a wide range of sensors with Whitworth pipe threads as per ISO 228-1, the standardized thread system named after the English engineer Sir Joseph Whitworth, which are widely used worldwide. Rechner now offers a broad range of sensors for these applications. We distinguish between G-thread and R-thread
Read More

The Complete LevelMaster Solution! A total state of the art sensor solution from Rechner with options for sticky, conductive and now wet or dry with high or low dielectric detection and all in one ideal G½” housing format! The latest LevelMaster sensor options from Rechner, with the G½” thread, a
Read More

Evaluation Electronics integrated! Now with steel rope electrode and weigth For dry bulk materials and non-conductive liquids with low dielectric constant (e.g. oil) The i-Level Probe with integrated evaluation electronics for analogue measurement with 2 additional switching points is well known and accepted. The advantages for you are: • Analogue
Read More

We are wishing a succesfull year
Read More

Power up Rechner’s new leak sensor, put it in place, walk away and it’s done! Leaks can be costly, dangerous for staff as well as the environment, plus cause production stoppages!   The latest ‘Mount & Go’ leak detection sensor from Rechner literally does everything! This state-of-the-art flush mountable capacitive
Read More

Rechner’s high performance analogue capacitive sensors offer essential critical control of Additive Manufacturing media of all types. The expansion of the 3D Additive Manufacturing business is exponentially increasing as production costs fall and advances in technology make mass production feasible. While growth rate in this industry already estimated at 12.5%
Read More

Do you use level probes for tank or hopper fill height control? Imagine if you could fit a probe, connect it, push one button, just once, and the whole set-up was done? And what if the level feedback was then the same for all media? In addition, what if the
Read More

IO-Link is the first globally standardised IO-technology (IEC 61131-9) to communicate with sensors and actuators. Its powerful point-to-point communication is based on the long-known 3-conductor connection without additional requirements regarding the cable material. IO-Link is thus not a field bus, but rather the evolutionary further development of the previous, proven connection
Read More

28. – 30.05.2019 SPS IPC DRIVES Parma, Italy H072 (Hall 5)
Read More