{"id":52593,"date":"2019-01-22T14:21:33","date_gmt":"2019-01-22T13:21:33","guid":{"rendered":"https:\/\/wpml.rechner-sensors.com\/the-isolating-switch-amplifier"},"modified":"2019-01-22T14:21:33","modified_gmt":"2019-01-22T13:21:33","slug":"the-isolating-switch-amplifier","status":"publish","type":"page","link":"https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge\/the-isolating-switch-amplifier","title":{"rendered":"The isolating switch amplifier"},"content":{"rendered":"
[vc_row el_class=”no_padding_row”][vc_column][vc_single_image image=”43224″ img_size=”full”][\/vc_column][\/vc_row][vc_row el_class=”contact_row”][vc_column width=”2\/3″][vc_column_text]\n

The isolating switch amplifier<\/h1>\n[\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_btn title=”To our isolating switching amplifiers” link=”url:https%3A%2F%2Fwww.rechner-sensors.com%2Fen%2Fproduct-category%2Fpower-supplies-isolating-switching-amplifiers|||”][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column][vc_column_text]An isolating switch amplifier or isolating amplifier prevents electrical conduction between two circuits that are still supposed to exchange power or signals among each other. This measurement amplifier uses so-called galvanic separation. For example, an explosion hazard area can be safely shielded from a non-explosion hazard area. It is also referred to as an isolation amplifier. This is not necessarily a voltage amplification. It can lead to a very desired signal amplification.[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”content_anker”][vc_column][vc_column_text]\n

Table of contents<\/strong><\/p>\n

How do isolating switch amplifiers work?<\/a><\/p>\n

Where is an isolating switch amplifier used?<\/a><\/p>\n

What are the advantages and disadvantages of isolating switch amplifiers?<\/a>[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”How_do_isolating_switch_amplifiers_work” el_class=”no_padding_row”][vc_column][vc_column_text]\n

How do isolating switch amplifiers work?<\/h2>\n

They are switches with a transmitting and a receiving part. The transmitter and the receiver operate on different potentials, the transmitter on the measurement potential. While the supply of electricity is galvanically separated using a transformer, the transmission is insulated electrically. The required galvanic separation of the entire system with the desired signal transmission can be achieved using different coupling methods.<\/p>\n

In inductive coupling<\/strong>, the electromagnetic induction for the signal transmission is used as a counter-induction. A transformer consisting of two spools is used.
\nIn capacitive coupling<\/strong>, the mutual electrical capacity (compatibility) is used to transmit the signal.<\/p>\n

The optoelectronic coupling via an optical coupler<\/strong> uses the transmission of DC signals via so-called light conduction. A transmitting diode conducts to a receiving transistor.
\nIsolating amplifiers with different couplings are processed in finished construction elements.
\n[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”Where_is_an_isolating_switch_amplifier_used” el_class=”no_padding_row”][vc_column][vc_column_text]\n

Where is an isolating switch amplifier used?<\/h2>\n

Isolating switch amplifiers are well-suited for use to achieve galvanic separation in safety-relevant areas while transmitting control signals at the same time, for example in medical installations.[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”What_are_the_advantages_and_disadvantages_of_isolating_switch_amplifiers” el_class=”no_padding_row”][vc_column][vc_column_text]\n

What are the advantages and disadvantages of isolating switch amplifiers?<\/h2>\n

Isolating switch amplifier reliably ensure the desired galvanic separation. However, this is only the case if the right component is used. Since this functionality is important in some hazardous areas, a few things need to be kept in mind when selecting a suitable construction element:<\/p>\n

Along with other electrical specifications, the respective supply voltages and operating frequencies play an important role in the functionality of the component. They can be found in the product description. Additional different equipment characteristics and specifications can also be significant in selecting the correct component. For example, sometimes the isolating switch amplifier should be remotely configurable with the help of some software, because the installation environment prohibits direct contact to the construction element. A pre-selection should also take into account the size and superstructure width of the respective device.
\n[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column][vc_column_text]\n

Other interesting articles<\/h2>\n[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column width=”1\/3″][vc_column_text]\n

Inductive sensor<\/h3>\n

Find out everything about the assembly and functionality of an inductive sensor.<\/p>\n

\u00bb Inductive sensor<\/a>[\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_column_text]\n

Capacitive sensor<\/h3>\n

Find out everything about the assembly and functionality of a capacitive sensor.<\/p>\n

\u00bb Capacitive sensor<\/a>[\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_column_text]\n

Filling level sensor<\/h3>\n

Find out everything about the assembly and functionality of the filling level sensor.<\/p>\n

\u00bb Filling level sensor<\/a>[\/vc_column_text][\/vc_column][\/vc_row]\n<\/div>","protected":false},"excerpt":{"rendered":"

[vc_row el_class=”no_padding_row”][vc_column][vc_single_image image=”43224″ img_size=”full”][\/vc_column][\/vc_row][vc_row el_class=”contact_row”][vc_column width=”2\/3″][vc_column_text] The isolating switch amplifier [\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_btn title=”To our isolating switching amplifiers” link=”url:https%3A%2F%2Fwww.rechner-sensors.com%2Fen%2Fproduct-category%2Fpower-supplies-isolating-switching-amplifiers|||”][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column][vc_column_text]An isolating switch amplifier or isolating amplifier prevents electrical conduction between two circuits that are still supposed to exchange power or signals among each other. This measurement amplifier uses so-called galvanic separation. For example, an explosion hazard area can be safely shielded from a non-explosion hazard area. It is also referred to as an isolation amplifier. This is not necessarily a voltage amplification. It can lead to a very desired signal amplification.[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”content_anker”][vc_column][vc_column_text] Table of contents How do isolating switch amplifiers work? Where is an isolating switch amplifier used? What are the advantages and disadvantages of isolating switch amplifiers?[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”How_do_isolating_switch_amplifiers_work” el_class=”no_padding_row”][vc_column][vc_column_text] How do isolating switch amplifiers work? They are switches with a transmitting and a receiving part. The transmitter and the receiver operate on different potentials, the transmitter on the measurement potential. While the supply of electricity is galvanically separated using a transformer, the transmission is insulated electrically. The required galvanic separation of the entire system with the desired signal transmission can be achieved using different coupling methods. In inductive coupling, the electromagnetic induction for the signal transmission is used as a counter-induction. A transformer consisting of two spools is used. In capacitive coupling, the mutual electrical capacity (compatibility) is used to transmit the signal. The optoelectronic coupling via an optical coupler uses the transmission of DC signals via so-called light conduction. A transmitting diode conducts to a receiving transistor. Isolating amplifiers with different couplings are processed in finished construction elements. [\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”Where_is_an_isolating_switch_amplifier_used” el_class=”no_padding_row”][vc_column][vc_column_text] Where is an isolating switch amplifier used? Isolating switch amplifiers are well-suited for use to achieve galvanic separation in safety-relevant areas while transmitting control signals at the same time, for example in medical installations.[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”What_are_the_advantages_and_disadvantages_of_isolating_switch_amplifiers” el_class=”no_padding_row”][vc_column][vc_column_text] What are the advantages and disadvantages of isolating switch amplifiers? Isolating switch amplifier reliably ensure the desired galvanic separation. However, this is only the case if the right component is used. Since this functionality is important in some hazardous areas, a few things need to be kept in mind when selecting a suitable construction element: Along with other electrical specifications, the respective supply voltages and operating frequencies play an important role in the functionality of the component. They can be found in the product description. Additional different equipment characteristics and specifications can also be significant in selecting the correct component. For example, sometimes the isolating switch amplifier should be remotely configurable with the help of some software, because the installation environment prohibits direct contact to the construction element. A pre-selection should also take into account the size and superstructure width of the respective device. [\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column][vc_column_text] Other interesting articles [\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column width=”1\/3″][vc_column_text] Inductive sensor Find out everything about the assembly and functionality of an inductive sensor. \u00bb Inductive sensor[\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_column_text] Capacitive sensor Find out everything about the assembly and functionality of a capacitive sensor. \u00bb Capacitive sensor[\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_column_text] Filling level sensor Find out everything about the assembly and functionality of the filling level sensor. \u00bb Filling level sensor[\/vc_column_text][\/vc_column][\/vc_row]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":51197,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":""},"class_list":["post-52593","page","type-page","status-publish","hentry","entry","post-inner"],"acf":[],"yoast_head":"\nThe isolating switch amplifier - Rechner Sensors<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge\/the-isolating-switch-amplifier\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"The isolating switch amplifier - Rechner Sensors\" \/>\n<meta property=\"og:description\" content=\"[vc_row el_class=”no_padding_row”][vc_column][vc_single_image image=”43224″ img_size=”full”][\/vc_column][\/vc_row][vc_row el_class=”contact_row”][vc_column width=”2\/3″][vc_column_text] The isolating switch amplifier [\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_btn title=”To our isolating switching amplifiers” link=”url:https%3A%2F%2Fwww.rechner-sensors.com%2Fen%2Fproduct-category%2Fpower-supplies-isolating-switching-amplifiers|||”][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column][vc_column_text]An isolating switch amplifier or isolating amplifier prevents electrical conduction between two circuits that are still supposed to exchange power or signals among each other. This measurement amplifier uses so-called galvanic separation. For example, an explosion hazard area can be safely shielded from a non-explosion hazard area. It is also referred to as an isolation amplifier. This is not necessarily a voltage amplification. It can lead to a very desired signal amplification.[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”content_anker”][vc_column][vc_column_text] Table of contents How do isolating switch amplifiers work? Where is an isolating switch amplifier used? What are the advantages and disadvantages of isolating switch amplifiers?[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”How_do_isolating_switch_amplifiers_work” el_class=”no_padding_row”][vc_column][vc_column_text] How do isolating switch amplifiers work? They are switches with a transmitting and a receiving part. The transmitter and the receiver operate on different potentials, the transmitter on the measurement potential. While the supply of electricity is galvanically separated using a transformer, the transmission is insulated electrically. The required galvanic separation of the entire system with the desired signal transmission can be achieved using different coupling methods. In inductive coupling, the electromagnetic induction for the signal transmission is used as a counter-induction. A transformer consisting of two spools is used. In capacitive coupling, the mutual electrical capacity (compatibility) is used to transmit the signal. The optoelectronic coupling via an optical coupler uses the transmission of DC signals via so-called light conduction. A transmitting diode conducts to a receiving transistor. Isolating amplifiers with different couplings are processed in finished construction elements. [\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”Where_is_an_isolating_switch_amplifier_used” el_class=”no_padding_row”][vc_column][vc_column_text] Where is an isolating switch amplifier used? Isolating switch amplifiers are well-suited for use to achieve galvanic separation in safety-relevant areas while transmitting control signals at the same time, for example in medical installations.[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”What_are_the_advantages_and_disadvantages_of_isolating_switch_amplifiers” el_class=”no_padding_row”][vc_column][vc_column_text] What are the advantages and disadvantages of isolating switch amplifiers? Isolating switch amplifier reliably ensure the desired galvanic separation. However, this is only the case if the right component is used. Since this functionality is important in some hazardous areas, a few things need to be kept in mind when selecting a suitable construction element: Along with other electrical specifications, the respective supply voltages and operating frequencies play an important role in the functionality of the component. They can be found in the product description. Additional different equipment characteristics and specifications can also be significant in selecting the correct component. For example, sometimes the isolating switch amplifier should be remotely configurable with the help of some software, because the installation environment prohibits direct contact to the construction element. A pre-selection should also take into account the size and superstructure width of the respective device. [\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column][vc_column_text] Other interesting articles [\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column width=”1\/3″][vc_column_text] Inductive sensor Find out everything about the assembly and functionality of an inductive sensor. \u00bb Inductive sensor[\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_column_text] Capacitive sensor Find out everything about the assembly and functionality of a capacitive sensor. \u00bb Capacitive sensor[\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_column_text] Filling level sensor Find out everything about the assembly and functionality of the filling level sensor. \u00bb Filling level sensor[\/vc_column_text][\/vc_column][\/vc_row]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge\/the-isolating-switch-amplifier\" \/>\n<meta property=\"og:site_name\" content=\"Rechner Sensors\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/documentations\\\/knowledge\\\/the-isolating-switch-amplifier\",\"url\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/documentations\\\/knowledge\\\/the-isolating-switch-amplifier\",\"name\":\"The isolating switch amplifier - Rechner Sensors\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/#website\"},\"datePublished\":\"2019-01-22T13:21:33+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/documentations\\\/knowledge\\\/the-isolating-switch-amplifier#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/documentations\\\/knowledge\\\/the-isolating-switch-amplifier\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/documentations\\\/knowledge\\\/the-isolating-switch-amplifier#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Start\",\"item\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Documentation\",\"item\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/documentations\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Knowledge\",\"item\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/documentations\\\/knowledge\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"The isolating switch amplifier\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/\",\"name\":\"Rechner Sensors\",\"description\":\"[:de]Marktf\u00fchrer in kapazitiver Sensortechnologie und Qualit\u00e4t.[:en]Capacitive Sensors \u2013 for more than 50 years our special field.[:fr]Les capteurs capacitifs \u2013 depuis plus de 50 ans notre c\u0153ur de m\u00e9tier.[:es]Sensores capacitivos - desde m\u00e1s de 50 a\u00f1os nuestro campo de especialidad.[:it]Sensores capacitivos - desde m\u00e1s de 50 a\u00f1os nuestro campo de especialidad.[:]\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.rechner-sensors.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"The isolating switch amplifier - Rechner Sensors","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge\/the-isolating-switch-amplifier","og_locale":"en_US","og_type":"article","og_title":"The isolating switch amplifier - Rechner Sensors","og_description":"[vc_row el_class=”no_padding_row”][vc_column][vc_single_image image=”43224″ img_size=”full”][\/vc_column][\/vc_row][vc_row el_class=”contact_row”][vc_column width=”2\/3″][vc_column_text] The isolating switch amplifier [\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_btn title=”To our isolating switching amplifiers” link=”url:https%3A%2F%2Fwww.rechner-sensors.com%2Fen%2Fproduct-category%2Fpower-supplies-isolating-switching-amplifiers|||”][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column][vc_column_text]An isolating switch amplifier or isolating amplifier prevents electrical conduction between two circuits that are still supposed to exchange power or signals among each other. This measurement amplifier uses so-called galvanic separation. For example, an explosion hazard area can be safely shielded from a non-explosion hazard area. It is also referred to as an isolation amplifier. This is not necessarily a voltage amplification. It can lead to a very desired signal amplification.[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”content_anker”][vc_column][vc_column_text] Table of contents How do isolating switch amplifiers work? Where is an isolating switch amplifier used? What are the advantages and disadvantages of isolating switch amplifiers?[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”How_do_isolating_switch_amplifiers_work” el_class=”no_padding_row”][vc_column][vc_column_text] How do isolating switch amplifiers work? They are switches with a transmitting and a receiving part. The transmitter and the receiver operate on different potentials, the transmitter on the measurement potential. While the supply of electricity is galvanically separated using a transformer, the transmission is insulated electrically. The required galvanic separation of the entire system with the desired signal transmission can be achieved using different coupling methods. In inductive coupling, the electromagnetic induction for the signal transmission is used as a counter-induction. A transformer consisting of two spools is used. In capacitive coupling, the mutual electrical capacity (compatibility) is used to transmit the signal. The optoelectronic coupling via an optical coupler uses the transmission of DC signals via so-called light conduction. A transmitting diode conducts to a receiving transistor. Isolating amplifiers with different couplings are processed in finished construction elements. [\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”Where_is_an_isolating_switch_amplifier_used” el_class=”no_padding_row”][vc_column][vc_column_text] Where is an isolating switch amplifier used? Isolating switch amplifiers are well-suited for use to achieve galvanic separation in safety-relevant areas while transmitting control signals at the same time, for example in medical installations.[\/vc_column_text][\/vc_column][\/vc_row][vc_row el_id=”What_are_the_advantages_and_disadvantages_of_isolating_switch_amplifiers” el_class=”no_padding_row”][vc_column][vc_column_text] What are the advantages and disadvantages of isolating switch amplifiers? Isolating switch amplifier reliably ensure the desired galvanic separation. However, this is only the case if the right component is used. Since this functionality is important in some hazardous areas, a few things need to be kept in mind when selecting a suitable construction element: Along with other electrical specifications, the respective supply voltages and operating frequencies play an important role in the functionality of the component. They can be found in the product description. Additional different equipment characteristics and specifications can also be significant in selecting the correct component. For example, sometimes the isolating switch amplifier should be remotely configurable with the help of some software, because the installation environment prohibits direct contact to the construction element. A pre-selection should also take into account the size and superstructure width of the respective device. [\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column][vc_column_text] Other interesting articles [\/vc_column_text][\/vc_column][\/vc_row][vc_row el_class=”no_padding_row”][vc_column width=”1\/3″][vc_column_text] Inductive sensor Find out everything about the assembly and functionality of an inductive sensor. \u00bb Inductive sensor[\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_column_text] Capacitive sensor Find out everything about the assembly and functionality of a capacitive sensor. \u00bb Capacitive sensor[\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_column_text] Filling level sensor Find out everything about the assembly and functionality of the filling level sensor. \u00bb Filling level sensor[\/vc_column_text][\/vc_column][\/vc_row]","og_url":"https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge\/the-isolating-switch-amplifier","og_site_name":"Rechner Sensors","twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge\/the-isolating-switch-amplifier","url":"https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge\/the-isolating-switch-amplifier","name":"The isolating switch amplifier - Rechner Sensors","isPartOf":{"@id":"https:\/\/www.rechner-sensors.com\/en\/#website"},"datePublished":"2019-01-22T13:21:33+00:00","breadcrumb":{"@id":"https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge\/the-isolating-switch-amplifier#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge\/the-isolating-switch-amplifier"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge\/the-isolating-switch-amplifier#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Start","item":"https:\/\/www.rechner-sensors.com\/en"},{"@type":"ListItem","position":2,"name":"Documentation","item":"https:\/\/www.rechner-sensors.com\/en\/documentations"},{"@type":"ListItem","position":3,"name":"Knowledge","item":"https:\/\/www.rechner-sensors.com\/en\/documentations\/knowledge"},{"@type":"ListItem","position":4,"name":"The isolating switch amplifier"}]},{"@type":"WebSite","@id":"https:\/\/www.rechner-sensors.com\/en\/#website","url":"https:\/\/www.rechner-sensors.com\/en\/","name":"Rechner Sensors","description":"[:de]Marktf\u00fchrer in kapazitiver Sensortechnologie und Qualit\u00e4t.[:en]Capacitive Sensors \u2013 for more than 50 years our special field.[:fr]Les capteurs capacitifs \u2013 depuis plus de 50 ans notre c\u0153ur de m\u00e9tier.[:es]Sensores capacitivos - desde m\u00e1s de 50 a\u00f1os nuestro campo de especialidad.[:it]Sensores capacitivos - desde m\u00e1s de 50 a\u00f1os nuestro campo de especialidad.[:]","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.rechner-sensors.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"}]}},"_links":{"self":[{"href":"https:\/\/www.rechner-sensors.com\/en\/wp-json\/wp\/v2\/pages\/52593","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.rechner-sensors.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.rechner-sensors.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.rechner-sensors.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rechner-sensors.com\/en\/wp-json\/wp\/v2\/comments?post=52593"}],"version-history":[{"count":0,"href":"https:\/\/www.rechner-sensors.com\/en\/wp-json\/wp\/v2\/pages\/52593\/revisions"}],"up":[{"embeddable":true,"href":"https:\/\/www.rechner-sensors.com\/en\/wp-json\/wp\/v2\/pages\/51197"}],"wp:attachment":[{"href":"https:\/\/www.rechner-sensors.com\/en\/wp-json\/wp\/v2\/media?parent=52593"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}