IAS-30-6.5-N-K-PEEK-StEx, ATEX

SKU: IA0344 Category:
Data sheet: Download PDF


Inductive Sensors with ATEX Certificate

Inductive Sensors according to NAMUR EN 60947-5-6 for use in areas with risk of explosion.
• ATEX Zone 20 (Dust) and 0 (Gas)
• Both variants are available for flush and non-flush mounting in metal.
• Different body sizes available from 6.5 mm in diameter up to M32 x 1,5

Very small, inductive StEx sensor
ATEX certification, zone 0 and 20
Robust PEEK housing


Additional information

Thread / Process connection
Housing material active surface

PEEK (FDA 21 CFR 177.2415)

Housing material
Housing material lid
Electrical version
Permitted residual ripple max.


Frequency of operating cycles max.
Protective circuit

Eingebaut, Eingebaut

Degree of protection IEC 60529

IP 67, IP 67

Selfinductance (L)
Selfcapacitance (C)
Operating current active surface free
Operating current active surface covered
Sensing dinstance Sn
Operating voltage
Permitted ambient temperature min.
Zulässige Umgebungstemperatur max.

+70 °C

Output function
Cable length

2 m, 2 m





ATEX product marking dust
ATEX product marking gas
Certified Zones ATEX
IECEX product marking dust
IECEX product marking gas
WHG certification

Auf Anfrage, Auf Anfrage

Highlights 2022
product overview Download PDF